Anmelden AnmeldenSchließen
| Passwort vergessen?
phpFK - Logo

Kasino Forum: Online-Kasino-Marketing

Forum | Registrieren | Mitglieder | Suche | Regeln | FAQ | Impressum
3 Benutzer onlineSie sind nicht angemeldet.  Anmelden
Raymond Mill work process
  •  
Bewertung abgeben
 1

crushermachine2 
Raymond Mill work process

After the bulk material is crushed by the jaw crusher to the required grain size, the raymond mill is used to send the material to the storage hopper, and then the vibrating feeder is evenly and quantitatively fed into the main grinding chamber for grinding, after grinding. The powder is carried away by the fan airflow.
After being graded by the analyzer, the powder with fineness enters the large cyclone collector along with the gas flow through the pipe, and is separated and collected. The powder is then discharged through the powder tube. The air flow is sucked into the blower by the return air pipe at the upper end of the cyclone collector. The entire air flow system of the machine is closed and circulates under positive and negative pressure.
The above is a detailed introduction to the structure and working principle of Raymond Mill. The relevant staff can refer to it. Before the Raymond Mill is installed, it should be properly kept. A complete maintenance system must be established to prevent the machine from being exposed to the sun, rain or rust. In the process of using Raymond Mill, it requires a fixed number of people to look after it. It also requires the operator to have a certain level of technology, but also to understand in detail its structure and working principle, and familiar with the operating procedures.

 1
principle   circulates   procedures   grinding   installed   collected   established   structure   material   collector   discharged   Raymond   technology   separated   introduction   understand   vibrating   maintenance   requires   quantitatively